Linkedin
CONTACT US

Metal Works: Products

ALUMINUM

These custom H20 (vehicular load rated) aluminum hatches required a test for water-tightness. We flipped them upside down and filled them with water as you can see here. Neoprene seals are used between the embed frame and the hatch frame to create the water tight seal.
Stop Log: To adjust the water level in different tanks or channels, stop logs are often used. We have fabricated these from aluminum or stainless steel material. They are stacked up inside of embedded or surface mounted "guides" inside the water channel to control the flow of water. Here you can see the wall and floor guides for stop logs for the Cowlitz Salmon Hatchery in Salkum, WA.
Stop Logs: These custom stop logs for the Cowlitz Salmon Hatchery are made of aluminum which stack together. The lower stop log has a slot for the upper one to nest into it. Here you can see them stacked for deliver.

MISCELLANEOUS STEEL FABRICATIONS

Fish Screens, bulkhead doors and stop log lifting device were some of the complex fabrications Cody provided for the Coleman National Fish Hatchery near Redding, CA.
Fish Screens, bulkhead doors and stop log lifting device were some of the complex fabrications Cody provided for the Coleman National Fish Hatchery near Redding, CA.
Galvanized pipe supports.
Galvanized Steel floor cover plates of a heavy duty type are fabricated by Cody.
Galvanized pipe supports.
Galvanized steel stairs and railing are made by Cody.
Here is walkway framing to access Glycol storage tanks in the Kileen Air force base made by Cody
Ornamental steel grills of all types are made by Cody.
Fish Screens, bulkhead doors and stop log lifting device were some of the complex fabrications Cody provided for the Coleman National Fish Hatchery near Redding, CA.

STRUCTURAL STEEL

Elevator Tower- The photo here shows an elevator tower that was entirely shop welded and delivered to the job site in one single piece with the roof split into two segments.
Pipe tower. This frame was fabricated for the San Mateo Anaerobic Digester project and supports elevated piping.
Steel Building: Here is a typical steel frame structure fabricated by Cody for the Picnic Point Waste Water Treatment plant in Washington state and the Freeport Intake structure which was a building shaped like a fish in Sacramento CA.
Steel Roofs. This white primed steel was built by Cody for support of the Blaine Lighthouse Point WWRF in Washington.
Steel trusses- Cody is a master of steel truss fabrication of all types. To ensure accurate fit up, we will shop assemble the trusses as needed to ensure all elements align prior to disassembling them and shipping to the job site. Included here are some photos of shop .assembly parts to check the fit up.
Steel trusses- Cody is a master of steel truss fabrication of all types. To ensure accurate fit up, we will shop assemble the trusses as needed to ensure all elements align prior to disassembling them and shipping to the job site. Included here are some photos of shop .assembly parts to check the fit up.
Steel trusses- Cody is a master of steel truss fabrication of all types. To ensure accurate fit up, we will shop assemble the trusses as needed to ensure all elements align prior to disassembling them and shipping to the job site. Included here are some photos of shop .assembly parts to check the fit up.

STAINLESS STEEL

Baffles: In the treatment of waste water, baffles are used to divert the flow of water through a basin. Cody has constructed major stainless steel baffles, often providing stainless steel beams or columns to support redwood boards.
Stainless steel vortex breaker baffles. Inlet suction pipes into large pumps cause "vortex" or spiralling of the water that can cause bubbles and damage the pumps. The vortex baffles change the geometry of the area to prohibit the problem. Cody specializes in the unique geometry of the stainless steel fabrications for this application.
Brace Frame Assemblies for Sunset Reservoir seismic retrofit in San Fransisco. This unique project utilized stainless steel type 316 box beam bracing which Cody fabricated into the square tubing of 12" x 12" x 5/8" wall thickness. They provide support for the concrete reservoir structure in case of an earthquake.
Embed plates: The main item which Cody fabricates are embedded plates for the connection of beams, columns, bracing, or other framing components of a structure. These are often time critical as they are the first thing needed on the job site to support the pouring concrete slabs and walls. Cody will do what it takes to get your embeds delivered on time.
Ladders: A ladder can be a thing of beauty not to mention its vital role in safety on a wastewater treatment plant. This is an area of fabrication in which we excel.
Ornamental screens of all types are designed and fabricated by Cody. In this photo you can see some motor screens which Cody developed based on some sketches by the architect for the Freeport pumping station on the Sacramento river.
Overflow weir plate: Here you can see a 25' diameter weir plate which Cody fabricated for the Newtown Creek pumping station in Manhattan. In the event of an emergency shutdown of the pumping station, the plate fills with water in the surge tower and prevents the East River from being filled with sewage in time for the emergency generators to kick in.
Polished letters were furnished for the plant entryway main sign
Wire mesh panels for all types of architectural walls are designed and built by Cody. Here you can see the in-progress construction of the City of Austin Parking garage screen walls.

FISH MOVING GEAR

Fish Moving Gear - For the Chief Joseph Dam in Washington State, Cody provided a steel fish elevator and crowder panel which was used to move the fish into different areas of the hatchery. In fish hatchery projects, custom fence panels are required to move or "crowd" the fish along their channels. They are required to be free of sharp edges and are designed to accommodate fish of various sizes. Cody creates these to your specifications

We Bring Your Ideas to Reality

Call Cody Builders Supply Today
CONTACT US
REACH US
  • 512-339-9834
  • 512-339-0165
  • 12002 North Lamar Boulevard
    Austin Texas, 78753
ABOUT US
QUICK LINKS

© 2024 Cody Builders Supply. All Rights Reserved. 

Privacy Policy | Disclaimer